The MBT 350 from PACE is the new standard that all other rework and repair systems are measured by. The system features PACE's exclusive IntelliHeat technology and can be used with 7 different handpieces. The MBT 350 has three handpice channels that are active simultaneously. The system is fully programmable and can be password protected from unauthorized changes.
2 versions of the MBT 350 are available. Click the link above to see the specific models that are available.
The MBT 301 from PACE is the ideal system when solder and desolder capability are needed on the benchtop. The MBT 301 features PACE's exclusive IntelliHeat technology and can be used with 7 different handpieces. The MBT 301 has two handpice channels that are active simultaneously. The system is fully programmable and can be password protected from changes.
The MBT 250 has been the work horse of the rework and repair industry for well over a decade. With over 45,000 field installations, no other system has proven itself with the endurance and reliability that is experienced by MBT 250 owners. The MBT 250 is available in 3 handpiece configurations and as a stand alone system that you can purchase the handpieces you want separately. If you are interested in the next generation or upgrading to a system where PACE's patented TD-100 Thermo-Drive soldering iron included, please see the MBT 301 or MBT 350 Rework & Repair systems.
The PRC 2000 is truly the complete benchtop factory in one compact, fully self-contained system. The PRC 2000's thermal management center powers and controls up to three SensaTemp handpieces simultaneously, for safe, rapid installation and removal of virtually all surface mount and thru-hole components. The PRC 2000 brings to the benchtop a process controlled factory capability for:
*Universal SMT and Thru-Hole Component Installation and Removal
*Self-Contained Solder Paste Dispensing
*Surface Mount land preparation
*Circuit/Interconnection Repair and Modification
*Conformal Coating Removal
*Multilayer Repair Capability
The PRC 200 comes with a wide array of handpieces (9), can power up to three SensaTemp handpieces simultaneously. The system self calibrates and features auto/manual temperature setback, auto power down, and constant memory. Built in Password security function is standard and has an auto tip offset compensation system.
Pulse Heat is a low voltage, direct power technology that offers selectable ramp rates for working on delivate components like ceramic caps. Controlled thermal ramping is the key to not damaging these types fo parts. The Pulse Heat Section powers 4 low voltage handpieces that allow you to perform:
*Hot bar soldering
*Circuit land and trace repair
*Conformal coating removal
*Resistive Tweezer soldering
*Thermal wire stripping, and
*Condictive tweezer soldering
MicroChine - Lighweight, variable speed machining handpiece for precision circuitry and substrate repairs on today's most boards. The MC-65 MicroChine features:
*"Smooth Start" integral handpiece motor for unparalleled control
*Integral finger-switch control
*Quiet, low vibration operation
*Closed loop tachometer feedback maintains controlled Drilling/Machining
*Dynamic breaking stops machining instantly for enhanced safety
*Unique probe brake feature for safe multilayer repair
PACE offers a broad range of rework and repair products to meet all your PCB needs. Whether you are replacing a surface mount component, repairing a multi-layer printed circuit board or making a plated thru-hole repair, PACE systems offer maximum versatility and easy of use.